[Users] ubuntu precreated template problem

[Martin Maurer]

We have quite new a good tested standard templates for Debian Etch, Lenny, Ubuntu 8.04 - 32 and 64 bit.
See ftp://pve.proxmox.com/appliances/system/
(or http://pve.proxmox.com/appliances/system/)

FYI, all are build using the dab:
http://pve.proxmox.com/wiki/Debian_Appliance_Builder

Br, Martin

http://pve.proxmox.com


> -----Original Message-----
> From: users-bounces at openvz.org [mailto:users-bounces at openvz.org] On
> Behalf Of dan
> Sent: Donnerstag, 05. Februar 2009 07:08
> To: users at openvz.org
> Subject: [Users] ubuntu precreated template problem
> 
> I'm having problems with the precreated 8.04-x86 template.
> 
> After setting the normal ipaddress/hostname/gateway settings and
> starting the template, I get no networking.  The CentOS template works
> fine, so its not my networking setup.  If I modify the
> /etc/network/interfaces file to be like a typical system, networking
> will restart without error, but I cannot access the network still.
> 
> The host node is Ubuntu 8.04.
> 
> Ideas? Suggestions?
> dan
> 
> 
> ======================================
> root at www:/# /etc/init.d/networking restart
>  * Reconfiguring network interfaces...
> /etc/network/interfaces:14: interface lo declared allow-auto twice
> ifdown: couldn't read interfaces file "/etc/network/interfaces"
> /etc/network/interfaces:14: interface lo declared allow-auto twice
> ifup: couldn't read interfaces file "/etc/network/interfaces"
>                                                       [fail]
> 
> ======================================
> root at www:/# cat /etc/network/interfaces
> # This configuration file is auto-generated.
> # WARNING: Do not edit this file, otherwise your changes will be lost.
> # Please edit template /etc/network/interfaces.template instead.
> 
> 
> auto lo
> iface lo inet loopback
> 	address 127.0.0.1
> 	netmask 255.0.0.0
> 	broadcast 127.255.255.255
> 	up ip route replace 127.0.0.0/8 dev lo
> 
> # Auto generated interfaces
> auto lo
> iface lo inet loopback
> 
> auto venet0
> iface venet0 inet static
> 	address 127.0.0.1
> 	netmask 255.255.255.255
> 	broadcast 0.0.0.0
> 	up route add -net 192.0.2.1 netmask 255.255.255.255 dev venet0
> 	up route add default gw 192.0.2.1
> auto venet0:0
> iface venet0:0 inet static
> 	address 192.168.1.237
> 	netmask 255.255.255.255
> 	broadcast 0.0.0.0
> =========================================
> _______________________________________________
> Users mailing list
> Users at openvz.org
> https://openvz.org/mailman/listinfo/users