[Users] ubuntu precreated template problem

[dan]

Thanks Thorsten & Martin.  Both options worked well.

dan

On Thu, Feb 5, 2009 at 4:32 AM, Martin Maurer <martin at proxmox.com> wrote:
> We have quite new a good tested standard templates for Debian Etch, Lenny, Ubuntu 8.04 - 32 and 64 bit.
> See ftp://pve.proxmox.com/appliances/system/
> (or http://pve.proxmox.com/appliances/system/)
>
> FYI, all are build using the dab:
> http://pve.proxmox.com/wiki/Debian_Appliance_Builder
>
> Br, Martin
>
> http://pve.proxmox.com
>
>
>> -----Original Message-----
>> From: users-bounces at openvz.org [mailto:users-bounces at openvz.org] On
>> Behalf Of dan
>> Sent: Donnerstag, 05. Februar 2009 07:08
>> To: users at openvz.org
>> Subject: [Users] ubuntu precreated template problem
>>
>> I'm having problems with the precreated 8.04-x86 template.
>>
>> After setting the normal ipaddress/hostname/gateway settings and
>> starting the template, I get no networking.  The CentOS template works
>> fine, so its not my networking setup.  If I modify the
>> /etc/network/interfaces file to be like a typical system, networking
>> will restart without error, but I cannot access the network still.
>>
>> The host node is Ubuntu 8.04.
>>
>> Ideas? Suggestions?
>> dan
>>
>>
>> ======================================
>> root at www:/# /etc/init.d/networking restart
>>  * Reconfiguring network interfaces...
>> /etc/network/interfaces:14: interface lo declared allow-auto twice
>> ifdown: couldn't read interfaces file "/etc/network/interfaces"
>> /etc/network/interfaces:14: interface lo declared allow-auto twice
>> ifup: couldn't read interfaces file "/etc/network/interfaces"
>>                                                       [fail]
>>
>> ======================================
>> root at www:/# cat /etc/network/interfaces
>> # This configuration file is auto-generated.
>> # WARNING: Do not edit this file, otherwise your changes will be lost.
>> # Please edit template /etc/network/interfaces.template instead.
>>
>>
>> auto lo
>> iface lo inet loopback
>>       address 127.0.0.1
>>       netmask 255.0.0.0
>>       broadcast 127.255.255.255
>>       up ip route replace 127.0.0.0/8 dev lo
>>
>> # Auto generated interfaces
>> auto lo
>> iface lo inet loopback
>>
>> auto venet0
>> iface venet0 inet static
>>       address 127.0.0.1
>>       netmask 255.255.255.255
>>       broadcast 0.0.0.0
>>       up route add -net 192.0.2.1 netmask 255.255.255.255 dev venet0
>>       up route add default gw 192.0.2.1
>> auto venet0:0
>> iface venet0:0 inet static
>>       address 192.168.1.237
>>       netmask 255.255.255.255
>>       broadcast 0.0.0.0
>> =========================================
>> _______________________________________________
>> Users mailing list
>> Users at openvz.org
>> https://openvz.org/mailman/listinfo/users
>
>
>
> _______________________________________________
> Users mailing list
> Users at openvz.org
> https://openvz.org/mailman/listinfo/users
>