[Devel] [PATCH vz10 1/4] ms/selftests: mptcp: join: rm: set backup flag
Eva Kurchatova
eva.kurchatova at virtuozzo.com
Wed Sep 16 15:17:34 MSK 2026
From: "Matthieu Baerts (NGI0)" <matttbe at kernel.org>
Some of these 'remove' tests rarely fail because a subflow has been
reset instead of cleanly removed. This can happen when one extra subflow
which has never carried data is being closed (FIN) on one side, while
the other is sending data for the first time.
To avoid such subflows to be used right at the end, the backup flag has
been added. With that, data will be only carried on the initial subflow.
Fixes: d2c4333a801c ("selftests: mptcp: add testcases for removing addrs")
Cc: stable at vger.kernel.org
Reviewed-by: Geliang Tang <geliang at kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe at kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-2-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba at kernel.org>
(cherry picked from commit aea73bae662a0e184393d6d7d0feb18d2577b9b9)
https://virtuozzo.atlassian.net/browse/VSTOR-139651
Feature: fix selftests
Signed-off-by: Eva Kurchatova <eva.kurchatova at virtuozzo.com>
---
.../testing/selftests/net/mptcp/mptcp_join.sh | 54 +++++++++----------
1 file changed, 27 insertions(+), 27 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index 2b08beb67f12..48af0da2bb6c 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -2337,7 +2337,7 @@ remove_tests()
if reset "remove single subflow"; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
- pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup
addr_nr_ns2=-1 speed=slow \
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 1 1 1
@@ -2350,8 +2350,8 @@ remove_tests()
if reset "remove multiple subflows"; then
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 0 2
- pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
- pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+ pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,backup
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup
addr_nr_ns2=-2 speed=slow \
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 2 2 2
@@ -2362,7 +2362,7 @@ remove_tests()
# single address, remove
if reset "remove single address"; then
pm_nl_set_limits $ns1 0 1
- pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup
pm_nl_set_limits $ns2 1 1
addr_nr_ns1=-1 speed=slow \
run_tests $ns1 $ns2 10.0.1.1
@@ -2375,9 +2375,9 @@ remove_tests()
# subflow and signal, remove
if reset "remove subflow and signal"; then
pm_nl_set_limits $ns1 0 2
- pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup
pm_nl_set_limits $ns2 1 2
- pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup
addr_nr_ns1=-1 addr_nr_ns2=-1 speed=slow \
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 2 2 2
@@ -2389,10 +2389,10 @@ remove_tests()
# subflows and signal, remove
if reset "remove subflows and signal"; then
pm_nl_set_limits $ns1 0 3
- pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup
pm_nl_set_limits $ns2 1 3
- pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
- pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup
+ pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow,backup
addr_nr_ns1=-1 addr_nr_ns2=-2 speed=10 \
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 3 3 3
@@ -2404,9 +2404,9 @@ remove_tests()
# addresses remove
if reset "remove addresses"; then
pm_nl_set_limits $ns1 3 3
- pm_nl_add_endpoint $ns1 10.0.2.1 flags signal id 250
- pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
- pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup id 250
+ pm_nl_add_endpoint $ns1 10.0.3.1 flags signal,backup
+ pm_nl_add_endpoint $ns1 10.0.4.1 flags signal,backup
pm_nl_set_limits $ns2 3 3
addr_nr_ns1=-3 speed=10 \
run_tests $ns1 $ns2 10.0.1.1
@@ -2419,10 +2419,10 @@ remove_tests()
# invalid addresses remove
if reset "remove invalid addresses"; then
pm_nl_set_limits $ns1 3 3
- pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.12.1 flags signal,backup
# broadcast IP: no packet for this address will be received on ns1
- pm_nl_add_endpoint $ns1 224.0.0.1 flags signal
- pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
+ pm_nl_add_endpoint $ns1 224.0.0.1 flags signal,backup
+ pm_nl_add_endpoint $ns1 10.0.3.1 flags signal,backup
pm_nl_set_limits $ns2 2 2
addr_nr_ns1=-3 speed=10 \
run_tests $ns1 $ns2 10.0.1.1
@@ -2436,10 +2436,10 @@ remove_tests()
# subflows and signal, flush
if reset "flush subflows and signal"; then
pm_nl_set_limits $ns1 0 3
- pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup
pm_nl_set_limits $ns2 1 3
- pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
- pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup
+ pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow,backup
addr_nr_ns1=-8 addr_nr_ns2=-8 speed=slow \
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 3 3 3
@@ -2452,9 +2452,9 @@ remove_tests()
if reset "flush subflows"; then
pm_nl_set_limits $ns1 3 3
pm_nl_set_limits $ns2 3 3
- pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow id 150
- pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
- pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
+ pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,backup id 150
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup
+ pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow,backup
addr_nr_ns1=-8 addr_nr_ns2=-8 speed=slow \
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 3 3 3
@@ -2471,9 +2471,9 @@ remove_tests()
# addresses flush
if reset "flush addresses"; then
pm_nl_set_limits $ns1 3 3
- pm_nl_add_endpoint $ns1 10.0.2.1 flags signal id 250
- pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
- pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup id 250
+ pm_nl_add_endpoint $ns1 10.0.3.1 flags signal,backup
+ pm_nl_add_endpoint $ns1 10.0.4.1 flags signal,backup
pm_nl_set_limits $ns2 3 3
addr_nr_ns1=-8 addr_nr_ns2=-8 speed=slow \
run_tests $ns1 $ns2 10.0.1.1
@@ -2486,9 +2486,9 @@ remove_tests()
# invalid addresses flush
if reset "flush invalid addresses"; then
pm_nl_set_limits $ns1 3 3
- pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
- pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
- pm_nl_add_endpoint $ns1 10.0.14.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.12.1 flags signal,backup
+ pm_nl_add_endpoint $ns1 10.0.3.1 flags signal,backup
+ pm_nl_add_endpoint $ns1 10.0.14.1 flags signal,backup
pm_nl_set_limits $ns2 3 3
addr_nr_ns1=-8 speed=slow \
run_tests $ns1 $ns2 10.0.1.1
--
2.55.0
More information about the Devel
mailing list