[Users] Kernel stab134.8 - panic at boot
Vasily Averin
vvs at virtuozzo.com
Fri Jan 18 11:32:31 MSK 2019
Dear Corrado,
> Thu Jan 17 14:33:30 CET 2019 Info: Installing ///lib/modules/2.6.32-754.el6.x86_64/extra/arcmsr/arcmsr.ko
This points to out-of-tree driver. Please call
rpm -qf /lib/modules/2.6.32-754.el6.x86_64/extra/arcmsr/arcmsr.ko
to be sure.
I afraid this driver is not included into original RHEL6 kernel, and was compiled/installed separately.
RHEL6 kernel is in maintenance mode, they do not add support for new hardware.
OpenVz6 inherit the state from RHEL6, we have no resources for hardware tesdting/maintenanace.
So you can:
- install out-of-tree driver over our kernel, like you did for original RHEL6 kernel,
(and repeat the procedure after each new kernel update)
- or switch to using OpenVz7, that is based on RHEL7 and inherit support for new hardware.
- or install OpenVz6 on old hardware.
Thank you,
Vasily Averin
On 1/18/19 7:14 AM, Corrado Fiore wrote:
> Dear All,
>
> I am installing the latest vz6 kernel on a beefy SuperMicro X10 machine. I followed the usual installation routine, i.e.
>
> -- Install CentOS 6 (latest)
> -- Follow instructions on page https://wiki.openvz.org/Quick_installation_(legacy)
> -- Reboot
>
> ## Expected result: machine rebooting in OpenVZ 6 kernel
>
> ## Actual result: a kernel panic error appears on screen at boot. I am pasting it here:
>
> [ 67.817501] Kernel panic - not syncing: Attempted to kill init!
> [ 67.817581] Pid: 1, comm: init veid: 0 Not tainted 2.6.32-042stabl34.8 #1
> [ 67.817660] Call Trace:
> [ 67.817737] [<ffffffff81564lb0>] ? panic+0xa7/0xl8b
> [ 67.817816] [<ffffffff8114a470>] ? perf_event_exit_task+0xc0/0x340
> [ 67.817897] [<ffffffff8108d56f>] ? do_exit+0x3bf/0x9c0
> [ 67.817975] [<ffffffff811c9e35>] ? fput+0x25/0x30
> [ 67.818052] [<ffffffff81570302>1 ? system_ca1l_after_swapgs+0xa2/0xl52
> [ 67.818132] [<ffffffff8108d5c8>] ? do_group_exit+0x58/0xd0
> [ 67.818210] [<ffffffff8108d657>] ? sys_exit_group+0x17/0x20
> [ 67.818288] [<ffffffff815703e7>] ? system_ca1l_fastpath+0x35/0x3a
> [ 67.818367] [<ffffffff8157030e>1 ? system_ca1l_after_swapgs+0xae/0xl52
>
> ## Notes:
>
> - Similar errors *seem* to be linked to problems when mounting the root file system;
> - The CentOS 2.6.32-754.el6.x86_64 kernel boots always successfully;
> - The main partition is backed by an Areca 1214-4i controller with BBU, configured as HW Raid10;
> - The kernel module for Areca controllers is present in both initrd images, albeit in different locations:
>
> cat /var/log/dracut.log | grep arcmsr
> Thu Jan 17 14:33:30 CET 2019 Info: Installing ///lib/modules/2.6.32-754.el6.x86_64/extra/arcmsr/arcmsr.ko
> Thu Jan 17 16:42:07 CET 2019 Info: Installing ///lib/modules/2.6.32-042stab134.8/kernel/drivers/scsi/arcmsr/arcmsr.ko
>
> ~~~~
>
> Has anyone encountered such an issue before?
>
> Thanks,
> Corrado Fiore
> _______________________________________________
> Users mailing list
> Users at openvz.org
> https://lists.openvz.org/mailman/listinfo/users
>
More information about the Users
mailing list