Fwd: [Users] boot error - unable to mount root fs on unknown-block(0, 0)

[Ian jonhson]

Thank you very much~~

But it seems that I can not connect internet in VE. It is OK when ping
to its host system, however when ping external IP address, it dumps. I
google the internet to find how to set the netwrok in VE, but I can
not find any hint to do it.

Could anybody give some advices how to configure network?

Thanks again,

Ian

On 10/18/07, Kirill Korotaev <dev at sw.ru> wrote:
> Ian,
>
> just like to any other usual machine using
> ssh from your workstation.
>
> 1. assign IP address to some VE using
> ve0# vzctl set <VEID> --ipadd <VEIP> --save
>
> 2. just in case, check that VE is pingable from your workstation:
> ws# ping <VEIP>
>
> 3. just in case, check that VE is running sshd service:
> ve0# vzctl exec <VEID> ps axf | grep sshd
>
> if it is not running sshd then enter to VE using vzctl enter command
> and install/start sshd service.
>
> 4. don't forget to set root user password
> ve0: vzctl set <VEID> --userpasswd root:mypassword
>
> 5. now you can login to VE as to usual machine using it's IP
>
> Kirill
>
>
> Ian jonhson wrote:
> > ---------- Forwarded message ----------
> > From: Ian jonhson <jonhson.ian at gmail.com>
> > Date: Oct 18, 2007 2:17 PM
> > Subject: Re: [Users] boot error - unable to mount root fs on unknown-block(0, 0)
> > To: frankb at frankb.us
> >
> >
> > Thank you very much!
> >
> > I have created my own VE, however how can I login VE by ssh? I used
> > the IP setting described in
> > http://wiki.openvz.org/Installation_on_Debian.
> >
> > Thanks again,
> >
> > Ian
> >
> > On 10/17/07, E Frank Ball III <frankb at frankb.us> wrote:
> >
> >>On Wed, Oct 17, 2007 at 12:20:01PM +0800, Ian jonhson wrote:
> >> > >  > Where can I get the pre-built kernel image?
> >> > >
> >> > > http://download.openvz.org/debian/dists/etch/main/binary-i386/base/
> >> > >
> >> > > In your sources list add:
> >> > >
> >> > > deb http://download.openvz.org/debian etch main
> >> > >
> >> >
> >> > I added the line in source.list, but apt-cache search said it can not
> >> > open the website.
> >>
> >>
> >>
> >>"apt-cache search linux-image-2.6.18-openvz" shows the openvz kernels
> >>for me.
> >>
> >>
> >>
> >> > > I'm using linux-image-2.6.18-openvz-13-39.1d2-686_028.39.1d2_i386.deb
> >> > >
> >> >
> >> > I opened the link given above and found the image file, but I don't
> >> > know how to use it after download the image file.
> >> >
> >> > Could you give me some advices?
> >>
> >>
> >>If you manually downloaded it then install it with
> >>"dpkg -i linux-image-2.6.18-openvz-13-39.1d2-686_028.39.1d2_i386.deb"
> >>
> >>
> >>--
> >>
> >>   E Frank Ball                frankb at frankb.us
> >>
> >
> > _______________________________________________
> > Users mailing list
> > Users at openvz.org
> > https://openvz.org/mailman/listinfo/users
> >
>
>