Linux version 2.6.16 (vvs@dhcp0-157) (gcc version 3.3.5 20050117 (prerelease) (SUSE Linux)) #1 SMP Thu May 4 17:49:16 MSD 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000fbff0000 (usable) BIOS-e820: 00000000fbff0000 - 00000000fbfff000 (ACPI data) BIOS-e820: 00000000fbfff000 - 00000000fc000000 (ACPI NVS) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000200000000 (usable) 7296MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 NX (Execute Disable) protection: active On node 0 totalpages: 2097152 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 1867776 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v002 ACPIAM ) @ 0x000f6dd0 ACPI: XSDT (v001 A M I OEMXSDT 0x12000527 MSFT 0x00000097) @ 0xfbff0100 ACPI: FADT (v001 A M I OEMFACP 0x12000527 MSFT 0x00000097) @ 0xfbff0281 ACPI: MADT (v001 A M I OEMAPIC 0x12000527 MSFT 0x00000097) @ 0xfbff0380 ACPI: OEMB (v001 A M I OEMBIOS 0x12000527 MSFT 0x00000097) @ 0xfbfff040 ACPI: SRAT (v001 A M I OEMSRAT 0x12000527 MSFT 0x00000097) @ 0xfbff39b0 ACPI: HPET (v001 A M I OEMHPET 0x12000527 MSFT 0x00000097) @ 0xfbff3ac0 ACPI: ASF! (v001 AMIASF AMDSTRET 0x00000001 INTL 0x02002026) @ 0xfbff3b00 ACPI: DSDT (v001 0AAAA 0AAAA001 0x00000001 INTL 0x02002026) @ 0x00000000 ACPI: PM-Timer IO Port: 0x5008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:5 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:5 APIC version 16 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfebff000] gsi_base[24]) IOAPIC[1]: apic_id 3, version 17, address 0xfebff000, GSI 24-27 ACPI: IOAPIC (id[0x04] address[0xfebfe000] gsi_base[28]) IOAPIC[2]: apic_id 4, version 17, address 0xfebfe000, GSI 28-31 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 3 I/O APICs ACPI: HPET id: 0x102282a0 base: 0xfec01000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at fc400000 (gap: fc000000:03780000) Built 1 zonelists Kernel command line: ro root=LABEL=/1 debug panic=5 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) mapped IOAPIC to ffffb000 (febff000) mapped IOAPIC to ffffa000 (febfe000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0565000 soft=c0545000 PID hash table entries: 4096 (order: 12, 65536 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 8248540k/8388608k available (3118k kernel code, 73068k reserved, 940k data, 288k init, 7405504k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Using HPET for base-timer Using HPET for gettimeofday Detected 1990.876 MHz processor. Using hpet for high-res timesource Calibrating delay using timer specific routine.. 3987.38 BogoMIPS (lpj=7974771) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000010 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. CPU0: AMD Opteron(tm) Processor 246 stepping 0a Booting processor 1/1 eip 2000 CPU 1 irqstacks, hard=c0566000 soft=c0546000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3981.36 BogoMIPS (lpj=7962728) CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000010 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: AMD Opteron(tm) Processor 246 stepping 0a Total of 2 processors activated (7968.74 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=4000 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 589k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3 PCI: Using configuration type 1 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:03:06.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:06.0 IO window: b000-bfff MEM window: fca00000-feafffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0a.0 IO window: disabled. MEM window: fc900000-fc9fffff PREFETCH window: ff500000-ff5fffff PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: fc800000-fc8fffff PREFETCH window: ff400000-ff4fffff highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered PCI: MSI quirk detected. pci_msi_quirk set. PCI: MSI quirk detected. pci_msi_quirk set. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Real Time Clock Driver v1.12ac serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Compaq SMART2 Driver (v 2.6.0) HP CISS Driver (v 2.6.10) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD8111: IDE controller at PCI slot 0000:00:07.1 AMD8111: chipset revision 3 AMD8111: not 100% native mode: will probe irqs later AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... Probing IDE interface ide1... Probing IDE interface ide0... Probing IDE interface ide1... Adaptec aacraid driver (1.1-4 May 4 2006 17:43:05) Emulex LightPulse Fibre Channel SCSI driver 8.1.1 Copyright(c) 2004-2005 Emulex. All rights reserved. megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005) megaraid: 2.20.4.7 (Release Date: Mon Nov 14 12:27:22 EST 2005) megaraid: probe new device 0x1000:0x1960:0x1000:0x4523: bus 1:slot 4:func 0 ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 29 (level, low) -> IRQ 16 megaraid: fw version:[713N] bios version:[G119] scsi0 : LSI Logic MegaRAID driver scsi[0]: scanning scsi channel 0 [Phy 0] for non-raid devices scsi[0]: scanning scsi channel 1 [virtual] for logical drives Vendor: MegaRAID Model: LD 0 RAID1 476G Rev: 713N Type: Direct-Access ANSI SCSI revision: 02 GDT-HA: Storage RAID Controller Driver. Version: 3.04 GDT-HA: Found 0 PCI Storage RAID Controllers 3ware Storage Controller device driver for Linux v1.26.02.001. 3ware 9000 Storage Controller device driver for Linux v2.26.02.005. libata version 1.20 loaded. SCSI device sda: 976773120 512-byte hdwr sectors (500108 MB) sda: Write Protect is off sda: Mode Sense: 00 00 00 00 sda: asking for cache data failed sda: assuming drive cache: write through SCSI device sda: 976773120 512-byte hdwr sectors (500108 MB) sda: Write Protect is off sda: Mode Sense: 00 00 00 00 sda: asking for cache data failed sda: assuming drive cache: write through sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:1:0:0: Attached scsi disk sda mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 6405.000 MB/sec raid5: using function: pIII_sse (6405.000 MB/sec) md: multipath personality registered for level -4 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com device-mapper: dm-multipath version 1.0.4 loaded device-mapper: dm-round-robin version 1.0.0 loaded device-mapper: dm-emc version 0.0.3 loaded NET: Registered protocol family 2 IP route cache hash table entries: 524288 (order: 9, 2097152 bytes) TCP established hash table entries: 524288 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 Starting balanced_irq Using IPI Shortcut mode md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 288k freed floppy0: no floppy controllers found tg3.c:v3.49 (Feb 2, 2006) ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 24 (level, low) -> IRQ 17 eth0: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:2f:90:96 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[769f4000] dma_mask[64-bit] ACPI: PCI Interrupt 0000:02:09.1[B] -> GSI 25 (level, low) -> IRQ 18 eth1: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:2f:90:97 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth1: dma_rwctrl[769f4000] dma_mask[64-bit] shpchp: HPC vendor_id 1022 device_id 7460 ss_vid 0 ss_did 0 shpchp: shpc_init: cannot reserve MMIO region shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 shpchp: shpc_init: cannot reserve MMIO region shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 shpchp: shpc_init: cannot reserve MMIO region shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 usbcore: registered new driver usbfs usbcore: registered new driver hub ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:03:00.0[D] -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:03:00.0: OHCI Host Controller ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:03:00.0: irq 19, io mem 0xfeafc000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ACPI: PCI Interrupt 0000:03:00.1[D] -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:03:00.1: OHCI Host Controller ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:03:00.1: irq 19, io mem 0xfeafd000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Processor [CPU1] (supports 8 throttling states) EXT3 FS on sda2, internal journal program dmraid is using a deprecated SCSI ioctl, please convert it to SG_IO kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 4192924k swap on /dev/sda5. Priority:-1 extents:1 across:4192924k NET: Registered protocol family 17 tg3: eth0: Link is up at 1000 Mbps, full duplex. tg3: eth0: Flow control is off for TX and off for RX. lp: driver loaded but no devices found sd_init_command: disk=sda, block=8596831, count=8 sda : block=8596831 sda : reading 8/8 512 byte blocks. scsi_add_timer: scmd: f7f30980, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30980 sd 0:1:0:0: command: Read (10): 28 00 00 83 2d 5f 00 00 08 00 buffer = 0xf7cfb240, bufflen = 4096, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() scsi_delete_timer: scmd: f7f30980, rtn: 1 sd 0:1:0:0: done 0xf7f30980 SUCCESS 0 sd 0:1:0:0: command: Read (10): 28 00 00 83 2d 5f 00 00 08 00 scsi host busy 1 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 8 sectors total, 4096 bytes done. use_sg is 1 sd_init_command: disk=sda, block=25372896, count=2 sda : block=25372896 sda : reading 2/2 512 byte blocks. scsi_add_timer: scmd: f7f30380, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30380 sd 0:1:0:0: command: Read (10): 28 00 01 83 28 e0 00 00 02 00 buffer = 0xf6bfebc0, bufflen = 1024, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() sd_init_command: disk=sda, block=2992845, count=8 sda : block=2992845 sda : writing 8/8 512 byte blocks. scsi_add_timer: scmd: f7f30500, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30500 sd 0:1:0:0: command: Write (10): 2a 00 00 2d aa cd 00 00 08 00 buffer = 0xf6bfeb00, bufflen = 4096, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() scsi_delete_timer: scmd: f7f30380, rtn: 1 sd 0:1:0:0: done 0xf7f30380 SUCCESS 0 sd 0:1:0:0: command: Read (10): 28 00 01 83 28 e0 00 00 02 00 scsi host busy 2 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 2 sectors total, 1024 bytes done. use_sg is 1 sd_init_command: disk=sda, block=446976176, count=2 sda : block=446976176 sda : reading 2/2 512 byte blocks. scsi_add_timer: scmd: f7f30380, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30380 sd 0:1:0:0: command: Read (10): 28 00 1a a4 50 b0 00 00 02 00 buffer = 0xf6bfebc0, bufflen = 1024, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() scsi_delete_timer: scmd: f7f30500, rtn: 1 sd 0:1:0:0: done 0xf7f30500 SUCCESS 0 sd 0:1:0:0: command: Write (10): 2a 00 00 2d aa cd 00 00 08 00 scsi host busy 2 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 8 sectors total, 4096 bytes done. use_sg is 1 scsi_delete_timer: scmd: f7f30380, rtn: 1 sd 0:1:0:0: done 0xf7f30380 SUCCESS 0 sd 0:1:0:0: command: Read (10): 28 00 1a a4 50 b0 00 00 02 00 scsi host busy 1 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 2 sectors total, 1024 bytes done. use_sg is 1 sd_init_command: disk=sda, block=237405, count=16 sda : block=237405 sda : writing 16/16 512 byte blocks. scsi_add_timer: scmd: f7f30380, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30380 sd 0:1:0:0: command: Write (10): 2a 00 00 03 9f 5d 00 00 10 00 buffer = 0xf6bfebc0, bufflen = 8192, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() scsi_delete_timer: scmd: f7f30380, rtn: 1 sd 0:1:0:0: done 0xf7f30380 SUCCESS 0 sd 0:1:0:0: command: Write (10): 2a 00 00 03 9f 5d 00 00 10 00 scsi host busy 1 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 16 sectors total, 8192 bytes done. use_sg is 2 sd_init_command: disk=sda, block=446984364, count=2 sda : block=446984364 sda : reading 2/2 512 byte blocks. scsi_add_timer: scmd: f7f30380, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30380 sd 0:1:0:0: command: Read (10): 28 00 1a a4 70 ac 00 00 02 00 buffer = 0xf6bfebc0, bufflen = 1024, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() scsi_delete_timer: scmd: f7f30380, rtn: 1 sd 0:1:0:0: done 0xf7f30380 SUCCESS 0 sd 0:1:0:0: command: Read (10): 28 00 1a a4 70 ac 00 00 02 00 scsi host busy 1 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 2 sectors total, 1024 bytes done. use_sg is 1 sd_init_command: disk=sda, block=447205552, count=2 sda : block=447205552 sda : reading 2/2 512 byte blocks. scsi_add_timer: scmd: f7f30380, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30380 sd 0:1:0:0: command: Read (10): 28 00 1a a7 d0 b0 00 00 02 00 buffer = 0xf6bfebc0, bufflen = 1024, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() scsi_delete_timer: scmd: f7f30380, rtn: 1 sd 0:1:0:0: done 0xf7f30380 SUCCESS 0 sd 0:1:0:0: command: Read (10): 28 00 1a a7 d0 b0 00 00 02 00 scsi host busy 1 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 2 sectors total, 1024 bytes done. use_sg is 1 sd_init_command: disk=sda, block=447217836, count=2 sda : block=447217836 sda : reading 2/2 512 byte blocks. scsi_add_timer: scmd: f7f30380, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30380 sd 0:1:0:0: command: Read (10): 28 00 1a a8 00 ac 00 00 02 00 buffer = 0xf6bfebc0, bufflen = 1024, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() scsi_delete_timer: scmd: f7f30380, rtn: 1 sd 0:1:0:0: done 0xf7f30380 SUCCESS 0 sd 0:1:0:0: command: Read (10): 28 00 1a a8 00 ac 00 00 02 00 scsi host busy 1 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 2 sectors total, 1024 bytes done. use_sg is 1 sd_init_command: disk=sda, block=447205554, count=2 sda : block=447205554 sda : reading 2/2 512 byte blocks. scsi_add_timer: scmd: f7f30380, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30380 sd 0:1:0:0: command: Read (10): 28 00 1a a7 d0 b2 00 00 02 00 buffer = 0xf6bfebc0, bufflen = 1024, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() scsi_delete_timer: scmd: f7f30380, rtn: 1 sd 0:1:0:0: done 0xf7f30380 SUCCESS 0 sd 0:1:0:0: command: Read (10): 28 00 1a a7 d0 b2 00 00 02 00 scsi host busy 1 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 2 sectors total, 1024 bytes done. use_sg is 1 sd_init_command: disk=sda, block=447218934, count=2 sda : block=447218934 sda : reading 2/2 512 byte blocks. scsi_add_timer: scmd: f7f30380, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30380 sd 0:1:0:0: command: Read (10): 28 00 1a a8 04 f6 00 00 02 00 buffer = 0xf6bfebc0, bufflen = 1024, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() scsi_delete_timer: scmd: f7f30380, rtn: 1 sd 0:1:0:0: done 0xf7f30380 SUCCESS 0 sd 0:1:0:0: command: Read (10): 28 00 1a a8 04 f6 00 00 02 00 scsi host busy 1 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 2 sectors total, 1024 bytes done. use_sg is 1 sd_init_command: disk=sda, block=447811834, count=2 sda : block=447811834 sda : reading 2/2 512 byte blocks. scsi_add_timer: scmd: f7f30380, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30380 sd 0:1:0:0: command: Read (10): 28 00 1a b1 10 fa 00 00 02 00 buffer = 0xf6bfebc0, bufflen = 1024, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() scsi_delete_timer: scmd: f7f30380, rtn: 1 sd 0:1:0:0: done 0xf7f30380 SUCCESS 0 sd 0:1:0:0: command: Read (10): 28 00 1a b1 10 fa 00 00 02 00 scsi host busy 1 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 2 sectors total, 1024 bytes done. use_sg is 1 sd_init_command: disk=sda, block=447825518, count=2 sda : block=447825518 sda : reading 2/2 512 byte blocks. scsi_add_timer: scmd: f7f30380, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30380 sd 0:1:0:0: command: Read (10): 28 00 1a b1 46 6e 00 00 02 00 buffer = 0xf6bfebc0, bufflen = 1024, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() scsi_delete_timer: scmd: f7f30380, rtn: 1 sd 0:1:0:0: done 0xf7f30380 SUCCESS 0 sd 0:1:0:0: command: Read (10): 28 00 1a b1 46 6e 00 00 02 00 scsi host busy 1 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 2 sectors total, 1024 bytes done. use_sg is 1 sd_init_command: disk=sda, block=871764144, count=2 sda : block=871764144 sda : reading 2/2 512 byte blocks. scsi_add_timer: scmd: f7f30380, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30380 sd 0:1:0:0: command: Read (10): 28 00 33 f6 10 b0 00 00 02 00 buffer = 0xf6bfebc0, bufflen = 1024, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() scsi_delete_timer: scmd: f7f30380, rtn: 1 sd 0:1:0:0: done 0xf7f30380 SUCCESS 0 sd 0:1:0:0: command: Read (10): 28 00 33 f6 10 b0 00 00 02 00 scsi host busy 1 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 2 sectors total, 1024 bytes done. use_sg is 1 sd_init_command: disk=sda, block=871769260, count=26 sda : block=871769260 sda : reading 26/26 512 byte blocks. scsi_add_timer: scmd: f7f30380, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30380 sd 0:1:0:0: command: Read (10): 28 00 33 f6 24 ac 00 00 1a 00 buffer = 0xf6bfebc0, bufflen = 13312, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() scsi_delete_timer: scmd: f7f30380, rtn: 1 sd 0:1:0:0: done 0xf7f30380 SUCCESS 0 sd 0:1:0:0: command: Read (10): 28 00 33 f6 24 ac 00 00 1a 00 scsi host busy 1 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 26 sectors total, 13312 bytes done. use_sg is 3 attempt to access beyond end of device sda6: rw=0, want=1044134458, limit=951401367 Buffer I/O error on device sda6, logical block 522067228 attempt to access beyond end of device sda6: rw=0, want=1178878530, limit=951401367 Buffer I/O error on device sda6, logical block 589439264 attempt to access beyond end of device sda6: rw=0, want=1313622602, limit=951401367 Buffer I/O error on device sda6, logical block 656811300 attempt to access beyond end of device sda6: rw=0, want=1448366674, limit=951401367 Buffer I/O error on device sda6, logical block 724183336 attempt to access beyond end of device sda6: rw=0, want=1583110746, limit=951401367 Buffer I/O error on device sda6, logical block 791555372 attempt to access beyond end of device sda6: rw=0, want=1717854818, limit=951401367 Buffer I/O error on device sda6, logical block 858927408 attempt to access beyond end of device sda6: rw=0, want=1852598890, limit=951401367 Buffer I/O error on device sda6, logical block 926299444 attempt to access beyond end of device sda6: rw=0, want=1987342962, limit=951401367 Buffer I/O error on device sda6, logical block 993671480 attempt to access beyond end of device sda6: rw=0, want=2122087034, limit=951401367 Buffer I/O error on device sda6, logical block 1061043516 attempt to access beyond end of device sda6: rw=0, want=2256831106, limit=951401367 Buffer I/O error on device sda6, logical block 1128415552 attempt to access beyond end of device sda6: rw=0, want=2391575178, limit=951401367 attempt to access beyond end of device sda6: rw=0, want=2526319250, limit=951401367 attempt to access beyond end of device sda6: rw=0, want=2661063322, limit=951401367 sd_init_command: disk=sda, block=934757082, count=2 sda : block=934757082 sda : reading 2/2 512 byte blocks. scsi_add_timer: scmd: f7f30380, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30380 sd 0:1:0:0: command: Read (10): 28 00 37 b7 42 da 00 00 02 00 buffer = 0xf6bfebc0, bufflen = 1024, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() sd_init_command: disk=sda, block=126292650, count=2 sda : block=126292650 sda : reading 2/2 512 byte blocks. scsi_add_timer: scmd: f7f30500, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30500 sd 0:1:0:0: command: Read (10): 28 00 07 87 12 aa 00 00 02 00 buffer = 0xf6bfeb00, bufflen = 1024, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() sd_init_command: disk=sda, block=261036722, count=2 sda : block=261036722 sda : reading 2/2 512 byte blocks. scsi_add_timer: scmd: f7f30680, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30680 sd 0:1:0:0: command: Read (10): 28 00 0f 8f 1a b2 00 00 02 00 buffer = 0xf6bfea40, bufflen = 1024, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() sd_init_command: disk=sda, block=395780794, count=2 sda : block=395780794 sda : reading 2/2 512 byte blocks. scsi_add_timer: scmd: f7f30800, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30800 sd 0:1:0:0: command: Read (10): 28 00 17 97 22 ba 00 00 02 00 buffer = 0xf6bfe980, bufflen = 1024, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() sd_init_command: disk=sda, block=530524866, count=2 sda : block=530524866 sda : reading 2/2 512 byte blocks. scsi_add_timer: scmd: f7f30e00, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30e00 sd 0:1:0:0: command: Read (10): 28 00 1f 9f 2a c2 00 00 02 00 buffer = 0xf6bfe8c0, bufflen = 1024, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() sd_init_command: disk=sda, block=665268938, count=2 sda : block=665268938 sda : reading 2/2 512 byte blocks. scsi_add_timer: scmd: f7f30c80, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30c80 sd 0:1:0:0: command: Read (10): 28 00 27 a7 32 ca 00 00 02 00 buffer = 0xf6bfe800, bufflen = 1024, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() sd_init_command: disk=sda, block=800013010, count=2 sda : block=800013010 sda : reading 2/2 512 byte blocks. scsi_add_timer: scmd: f7f30b00, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30b00 sd 0:1:0:0: command: Read (10): 28 00 2f af 3a d2 00 00 02 00 buffer = 0xf6bfe740, bufflen = 1024, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() attempt to access beyond end of device sda6: rw=0, want=2795807394, limit=951401367 attempt to access beyond end of device sda6: rw=0, want=2930551466, limit=951401367 scsi_delete_timer: scmd: f7f30380, rtn: 1 sd 0:1:0:0: done 0xf7f30380 SUCCESS 0 sd 0:1:0:0: command: Read (10): 28 00 37 b7 42 da 00 00 02 00 scsi host busy 7 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 2 sectors total, 1024 bytes done. use_sg is 1 scsi_delete_timer: scmd: f7f30500, rtn: 1 sd 0:1:0:0: done 0xf7f30500 SUCCESS 0 sd 0:1:0:0: command: Read (10): 28 00 07 87 12 aa 00 00 02 00 scsi host busy 6 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 2 sectors total, 1024 bytes done. use_sg is 1 scsi_delete_timer: scmd: f7f30680, rtn: 1 sd 0:1:0:0: done 0xf7f30680 SUCCESS 0 sd 0:1:0:0: command: Read (10): 28 00 0f 8f 1a b2 00 00 02 00 scsi host busy 5 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 2 sectors total, 1024 bytes done. use_sg is 1 scsi_delete_timer: scmd: f7f30800, rtn: 1 sd 0:1:0:0: done 0xf7f30800 SUCCESS 0 sd 0:1:0:0: command: Read (10): 28 00 17 97 22 ba 00 00 02 00 scsi host busy 4 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 2 sectors total, 1024 bytes done. use_sg is 1 scsi_delete_timer: scmd: f7f30e00, rtn: 1 sd 0:1:0:0: done 0xf7f30e00 SUCCESS 0 sd 0:1:0:0: command: Read (10): 28 00 1f 9f 2a c2 00 00 02 00 scsi host busy 3 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 2 sectors total, 1024 bytes done. use_sg is 1 scsi_delete_timer: scmd: f7f30c80, rtn: 1 sd 0:1:0:0: done 0xf7f30c80 SUCCESS 0 sd 0:1:0:0: command: Read (10): 28 00 27 a7 32 ca 00 00 02 00 scsi host busy 2 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 2 sectors total, 1024 bytes done. use_sg is 1 scsi_delete_timer: scmd: f7f30b00, rtn: 1 sd 0:1:0:0: done 0xf7f30b00 SUCCESS 0 sd 0:1:0:0: command: Read (10): 28 00 2f af 3a d2 00 00 02 00 scsi host busy 1 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 2 sectors total, 1024 bytes done. use_sg is 1 sd_init_command: disk=sda, block=237421, count=8 sda : block=237421 sda : writing 8/8 512 byte blocks. scsi_add_timer: scmd: f7f30b00, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30b00 sd 0:1:0:0: command: Write (10): 2a 00 00 03 9f 6d 00 00 08 00 buffer = 0xf6bfe740, bufflen = 4096, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() attempt to access beyond end of device sda6: rw=0, want=1044134458, limit=951401367 scsi_delete_timer: scmd: f7f30b00, rtn: 1 sd 0:1:0:0: done 0xf7f30b00 SUCCESS 0 sd 0:1:0:0: command: Write (10): 2a 00 00 03 9f 6d 00 00 08 00 scsi host busy 1 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 8 sectors total, 4096 bytes done. use_sg is 1 sd_init_command: disk=sda, block=8338293, count=8 sda : block=8338293 sda : reading 8/8 512 byte blocks. scsi_add_timer: scmd: f7f30c80, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30c80 sd 0:1:0:0: command: Read (10): 28 00 00 7f 3b 75 00 00 08 00 buffer = 0xf6bfebc0, bufflen = 4096, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() scsi_delete_timer: scmd: f7f30c80, rtn: 1 sd 0:1:0:0: done 0xf7f30c80 SUCCESS 0 sd 0:1:0:0: command: Read (10): 28 00 00 7f 3b 75 00 00 08 00 scsi host busy 1 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 8 sectors total, 4096 bytes done. use_sg is 1 sd_init_command: disk=sda, block=8382885, count=64 sda : block=8382885 sda : reading 64/64 512 byte blocks. scsi_add_timer: scmd: f7f30380, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30380 sd 0:1:0:0: command: Read (10): 28 00 00 7f e9 a5 00 00 40 00 buffer = 0xf6bfeb00, bufflen = 32768, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() scsi_delete_timer: scmd: f7f30380, rtn: 1 sd 0:1:0:0: done 0xf7f30380 SUCCESS 0 sd 0:1:0:0: command: Read (10): 28 00 00 7f e9 a5 00 00 40 00 scsi host busy 1 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 64 sectors total, 32768 bytes done. use_sg is 8 sd_init_command: disk=sda, block=8382949, count=40 sda : block=8382949 sda : reading 40/40 512 byte blocks. scsi_add_timer: scmd: f7f30380, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30380 sd 0:1:0:0: command: Read (10): 28 00 00 7f e9 e5 00 00 28 00 buffer = 0xf6bfeb00, bufflen = 20480, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() sd_init_command: disk=sda, block=2992901, count=8 sda : block=2992901 sda : writing 8/8 512 byte blocks. scsi_add_timer: scmd: f7f30c80, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30c80 sd 0:1:0:0: command: Write (10): 2a 00 00 2d ab 05 00 00 08 00 buffer = 0xf6bfebc0, bufflen = 4096, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() scsi_delete_timer: scmd: f7f30380, rtn: 1 sd 0:1:0:0: done 0xf7f30380 SUCCESS 0 sd 0:1:0:0: command: Read (10): 28 00 00 7f e9 e5 00 00 28 00 scsi host busy 2 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 40 sectors total, 20480 bytes done. use_sg is 4 sd_init_command: disk=sda, block=8382989, count=16 sda : block=8382989 sda : reading 16/16 512 byte blocks. scsi_add_timer: scmd: f7f30380, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30380 sd 0:1:0:0: command: Read (10): 28 00 00 7f ea 0d 00 00 10 00 buffer = 0xf6bfeb00, bufflen = 8192, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() scsi_delete_timer: scmd: f7f30380, rtn: 1 sd 0:1:0:0: done 0xf7f30380 SUCCESS 0 sd 0:1:0:0: command: Read (10): 28 00 00 7f ea 0d 00 00 10 00 scsi host busy 2 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 16 sectors total, 8192 bytes done. use_sg is 2 scsi_delete_timer: scmd: f7f30c80, rtn: 1 sd 0:1:0:0: done 0xf7f30c80 SUCCESS 0 sd 0:1:0:0: command: Write (10): 2a 00 00 2d ab 05 00 00 08 00 scsi host busy 1 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 8 sectors total, 4096 bytes done. use_sg is 1 sd_init_command: disk=sda, block=247085, count=16 sda : block=247085 sda : writing 16/16 512 byte blocks. scsi_add_timer: scmd: f7f30c80, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30c80 sd 0:1:0:0: command: Write (10): 2a 00 00 03 c5 2d 00 00 10 00 buffer = 0xf6bfebc0, bufflen = 8192, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() scsi_delete_timer: scmd: f7f30c80, rtn: 1 sd 0:1:0:0: done 0xf7f30c80 SUCCESS 0 sd 0:1:0:0: command: Write (10): 2a 00 00 03 c5 2d 00 00 10 00 scsi host busy 1 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 16 sectors total, 8192 bytes done. use_sg is 2 sd 0:1:0:0: Attached scsi generic sg0 type 0 sg_open: dev=0, flags=0x8002 scsi_block_when_processing_errors: rtn: 1 sg_add_sfp: sfp=0xf680e000 sg_build_reserve: req_size=32768 sg_build_indirect: buff_size=32768, blk_size=32768 sg_build_build: k=0, a=0xc16d0900, len=32768 sg_build_indirect: k_use_sg=1, rem_sz=0 sg_add_sfp: bufflen=32768, k_use_sg=1 sg_ioctl: sg0, cmd=0x2282 sd_init_command: disk=sda, block=2992917, count=8 sda : block=2992917 sda : writing 8/8 512 byte blocks. scsi_add_timer: scmd: f7f30800, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30800 sd 0:1:0:0: command: Write (10): 2a 00 00 2d ab 15 00 00 08 00 buffer = 0xf6bfe080, bufflen = 4096, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() sg_ioctl: sg0, cmd=0x2275 sg_remove_scat: k_use_sg=1 sg_remove_scat: k=0, a=0xc16d0900, len=32768 sg_build_reserve: req_size=65536 sg_build_indirect: buff_size=65536, blk_size=65536 sg_build_build: k=0, a=0xc16d0900, len=32768 sg_build_build: k=1, a=0xc16d0a00, len=32768 sg_build_indirect: k_use_sg=2, rem_sz=0 sg_ioctl: sg0, cmd=0x227b sg_ioctl: sg0, cmd=0x2276 sg_write: sg0, count=64 scsi_block_when_processing_errors: rtn: 1 sg_common_write: scsi opcode=0x28, cmd_size=10 sg_start_req: dxfer_len=13312 sg_link_reserve: size=13312 scsi_add_timer: scmd: f7f30b00, time: 15000, (c02b1420) sd 0:1:0:0: send 0xf7f30b00 sd 0:1:0:0: command: Read (10): 28 00 33 f6 24 ac 00 00 1a 00 buffer = 0xf6bfe680, bufflen = 13312, done = 0xc02b4b90, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() sg_read: sg0, count=64 scsi_delete_timer: scmd: f7f30800, rtn: 1 sd 0:1:0:0: done 0xf7f30800 SUCCESS 0 sd 0:1:0:0: command: Write (10): 2a 00 00 2d ab 15 00 00 08 00 scsi host busy 2 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 8 sectors total, 4096 bytes done. use_sg is 1 sd_init_command: disk=sda, block=249717, count=56 sda : block=249717 sda : writing 56/56 512 byte blocks. scsi_add_timer: scmd: f7f30800, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30800 sd 0:1:0:0: command: Write (10): 2a 00 00 03 cf 75 00 00 38 00 buffer = 0xf6bfe080, bufflen = 28672, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() scsi_delete_timer: scmd: f7f30b00, rtn: 1 sd 0:1:0:0: done 0xf7f30b00 SUCCESS 0 sd 0:1:0:0: command: Read (10): 28 00 33 f6 24 ac 00 00 1a 00 scsi host busy 2 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) 26 sectors total, 13312 bytes done. use_sg is 1 sg_cmd_done: sg0, pack_id=871769260, res=0x0 scsi_delete_timer: scmd: f7f30800, rtn: 1 sd 0:1:0:0: done 0xf7f30800 SUCCESS 0 sd 0:1:0:0: command: Write (10): 2a 00 00 03 cf 75 00 00 38 00 scsi host busy 1 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 56 sectors total, 28672 bytes done. use_sg is 7 sd_init_command: disk=sda, block=249773, count=8 sda : block=249773 sda : writing 8/8 512 byte blocks. scsi_add_timer: scmd: f7f30800, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30800 sd 0:1:0:0: command: Write (10): 2a 00 00 03 cf ad 00 00 08 00 buffer = 0xf6bfe080, bufflen = 4096, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() sg_read_xfer: num_xfer=13312, iovec_count=0, k_use_sg=1 scsi_delete_timer: scmd: f7f30800, rtn: 1 sd 0:1:0:0: done 0xf7f30800 SUCCESS 0 sd 0:1:0:0: command: Write (10): 2a 00 00 03 cf ad 00 00 08 00 scsi host busy 1 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 8 sectors total, 4096 bytes done. use_sg is 1 sg_finish_rem_req: res_used=1 sg_unlink_reserve: req->k_use_sg=1 sd_init_command: disk=sda, block=2992917, count=8 sda : block=2992917 sda : writing 8/8 512 byte blocks. scsi_add_timer: scmd: f7f30800, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30800 sd 0:1:0:0: command: Write (10): 2a 00 00 2d ab 15 00 00 08 00 buffer = 0xf6bfe080, bufflen = 4096, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() sd_init_command: disk=sda, block=8807823, count=8 sda : block=8807823 sda : reading 8/8 512 byte blocks. scsi_add_timer: scmd: f7f30b00, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30b00 sd 0:1:0:0: command: Read (10): 28 00 00 86 65 8f 00 00 08 00 buffer = 0xf6bfe680, bufflen = 4096, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() scsi_delete_timer: scmd: f7f30800, rtn: 1 sd 0:1:0:0: done 0xf7f30800 SUCCESS 0 sd 0:1:0:0: command: Write (10): 2a 00 00 2d ab 15 00 00 08 00 scsi host busy 2 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 8 sectors total, 4096 bytes done. use_sg is 1 scsi_delete_timer: scmd: f7f30b00, rtn: 1 sd 0:1:0:0: done 0xf7f30b00 SUCCESS 0 sd 0:1:0:0: command: Read (10): 28 00 00 86 65 8f 00 00 08 00 scsi host busy 1 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 8 sectors total, 4096 bytes done. use_sg is 1 sd_init_command: disk=sda, block=4232917, count=64 sda : block=4232917 sda : reading 64/64 512 byte blocks. scsi_add_timer: scmd: f7f30380, time: 7500, (c02b1420) sd 0:1:0:0: send 0xf7f30380 sd 0:1:0:0: command: Read (10): 28 00 00 40 96 d5 00 00 40 00 buffer = 0xf6bfea40, bufflen = 32768, done = 0xc0366b40, queuecommand 0xc0344010 leaving scsi_dispatch_cmnd() scsi_delete_timer: scmd: f7f30380, rtn: 1 sd 0:1:0:0: done 0xf7f30380 SUCCESS 0 sd 0:1:0:0: command: Read (10): 28 00 00 40 96 d5 00 00 40 00 scsi host busy 1 failed 0 sd 0:1:0:0: Notifying upper driver of completion (result 0) sd_rw_intr: sda: res=0x0 64 sectors total, 32768 bytes done. use_sg is 5 sg_release: sg0 sg_fasync: sg0, mode=0 __sg_remove_sfp: bufflen=65536, k_use_sg=2 sg_remove_scat: k_use_sg=2 sg_remove_scat: k=0, a=0xc16d0900, len=32768 sg_remove_scat: k=1, a=0xc16d0a00, len=32768 __sg_remove_sfp: sfp=0xf680e000