[Devel] [PATCH 06/14] fuse: Trust kernel i_size only - v2
Miklos Szeredi
miklos at szeredi.hu
Tue Jan 29 02:18:04 PST 2013
On Fri, Jan 25, 2013 at 7:22 PM, Maxim V. Patlasov
<MPatlasov at parallels.com> wrote:
> Make fuse think that when writeback is on the inode's i_size is always
> up-to-date and not update it with the value received from the userspace.
> This is done because the page cache code may update i_size without letting
> the FS know.
>
> This assumption implies fixing the previously introduced short-read helper --
> when a short read occurs the 'hole' is filled with zeroes.
>
> fuse_file_fallocate() is also fixed because now we should keep i_size up to
> date, so it must be updated if FUSE_FALLOCATE request succeeded.
>
> Changed in v2:
> - improved comment in fuse_short_read()
> - fixed fuse_file_fallocate() for KEEP_SIZE mode
>
> Original patch by: Pavel Emelyanov <xemul at openvz.org>
> Signed-off-by: Maxim V. Patlasov <MPatlasov at parallels.com>
> ---
> fs/fuse/dir.c | 9 ++++++---
> fs/fuse/file.c | 43 +++++++++++++++++++++++++++++++++++++++++--
> fs/fuse/inode.c | 6 ++++--
> 3 files changed, 51 insertions(+), 7 deletions(-)
>
> diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
> index ed8f8c5..ff8b603 100644
> --- a/fs/fuse/dir.c
> +++ b/fs/fuse/dir.c
> @@ -827,7 +827,7 @@ static void fuse_fillattr(struct inode *inode, struct fuse_attr *attr,
> stat->mtime.tv_nsec = attr->mtimensec;
> stat->ctime.tv_sec = attr->ctime;
> stat->ctime.tv_nsec = attr->ctimensec;
> - stat->size = attr->size;
> + stat->size = i_size_read(inode);
The old code is correct and you break it. We always use the values
returned by GETATTR, instead of the cached ones. The cached ones are
a best guess by the kernel and they may or may not have been correct
at any point in time. The attributes returned by userspace are the
authentic ones.
For the "write cache" case what we want, I think, is a mode where the
kernel always trusts the cached attributes. The attribute cache is
initialized from values returned in LOOKUP and the kernel never needs
to call GETATTR since the attributes are always up-to-date.
Is that correct?
> stat->blocks = attr->blocks;
>
> if (attr->blksize != 0)
> @@ -1541,6 +1541,7 @@ static int fuse_do_setattr(struct dentry *entry, struct iattr *attr,
> struct fuse_setattr_in inarg;
> struct fuse_attr_out outarg;
> bool is_truncate = false;
> + bool is_wb = fc->writeback_cache;
> loff_t oldsize;
> int err;
>
> @@ -1613,7 +1614,8 @@ static int fuse_do_setattr(struct dentry *entry, struct iattr *attr,
> fuse_change_attributes_common(inode, &outarg.attr,
> attr_timeout(&outarg));
> oldsize = inode->i_size;
> - i_size_write(inode, outarg.attr.size);
> + if (!is_wb || is_truncate || !S_ISREG(inode->i_mode))
> + i_size_write(inode, outarg.attr.size);
Okay, I managed to understand what is going on here: if userspace is
behaving badly and is changing the size even if that was not
requested, then we silently reject that. But that's neither clearly
unrestandable (without a comment) nor sensible, I think.
If the filesystem is behaving badly, just let it. Or is there some
other reason why we'd want this check?
>
> if (is_truncate) {
> /* NOTE: this may release/reacquire fc->lock */
> @@ -1625,7 +1627,8 @@ static int fuse_do_setattr(struct dentry *entry, struct iattr *attr,
> * Only call invalidate_inode_pages2() after removing
> * FUSE_NOWRITE, otherwise fuse_launder_page() would deadlock.
> */
> - if (S_ISREG(inode->i_mode) && oldsize != outarg.attr.size) {
> + if ((is_truncate || !is_wb) &&
> + S_ISREG(inode->i_mode) && oldsize != outarg.attr.size) {
> truncate_pagecache(inode, oldsize, outarg.attr.size);
> invalidate_inode_pages2(inode->i_mapping);
> }
> diff --git a/fs/fuse/file.c b/fs/fuse/file.c
> index b28be33..6b64e11 100644
> --- a/fs/fuse/file.c
> +++ b/fs/fuse/file.c
> @@ -15,6 +15,7 @@
> #include <linux/module.h>
> #include <linux/compat.h>
> #include <linux/swap.h>
> +#include <linux/falloc.h>
>
> static const struct file_operations fuse_direct_io_file_operations;
>
> @@ -543,9 +544,31 @@ static void fuse_short_read(struct fuse_req *req, struct inode *inode,
> u64 attr_ver)
> {
> size_t num_read = req->out.args[0].size;
> + struct fuse_conn *fc = get_fuse_conn(inode);
> +
> + if (fc->writeback_cache) {
> + /*
> + * A hole in a file. Some data after the hole are in page cache,
> + * but have not reached the client fs yet. So, the hole is not
> + * present there.
> + */
> + int i;
> + int start_idx = num_read >> PAGE_CACHE_SHIFT;
> + size_t off = num_read & (PAGE_CACHE_SIZE - 1);
>
> - loff_t pos = page_offset(req->pages[0]) + num_read;
> - fuse_read_update_size(inode, pos, attr_ver);
> + for (i = start_idx; i < req->num_pages; i++) {
> + struct page *page = req->pages[i];
> + void *mapaddr = kmap_atomic(page);
> +
> + memset(mapaddr + off, 0, PAGE_CACHE_SIZE - off);
> +
> + kunmap_atomic(mapaddr);
> + off = 0;
> + }
> + } else {
> + loff_t pos = page_offset(req->pages[0]) + num_read;
> + fuse_read_update_size(inode, pos, attr_ver);
> + }
> }
>
> static int fuse_readpage(struct file *file, struct page *page)
> @@ -2285,6 +2308,8 @@ static long fuse_file_fallocate(struct file *file, int mode, loff_t offset,
> .mode = mode
> };
> int err;
> + bool change_i_size = fc->writeback_cache &&
> + !(mode & FALLOC_FL_KEEP_SIZE);
>
> if (fc->no_fallocate)
> return -EOPNOTSUPP;
> @@ -2293,6 +2318,11 @@ static long fuse_file_fallocate(struct file *file, int mode, loff_t offset,
> if (IS_ERR(req))
> return PTR_ERR(req);
>
> + if (change_i_size) {
> + struct inode *inode = file->f_mapping->host;
> + mutex_lock(&inode->i_mutex);
> + }
> +
> req->in.h.opcode = FUSE_FALLOCATE;
> req->in.h.nodeid = ff->nodeid;
> req->in.numargs = 1;
> @@ -2306,6 +2336,15 @@ static long fuse_file_fallocate(struct file *file, int mode, loff_t offset,
> }
> fuse_put_request(fc, req);
>
> + if (change_i_size) {
> + struct inode *inode = file->f_mapping->host;
> +
> + if (!err)
> + fuse_write_update_size(inode, offset + length);
> +
> + mutex_unlock(&inode->i_mutex);
> + }
> +
> return err;
> }
>
> diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
> index 9d95a5a..7e07dbd 100644
> --- a/fs/fuse/inode.c
> +++ b/fs/fuse/inode.c
> @@ -196,6 +196,7 @@ void fuse_change_attributes(struct inode *inode, struct fuse_attr *attr,
> {
> struct fuse_conn *fc = get_fuse_conn(inode);
> struct fuse_inode *fi = get_fuse_inode(inode);
> + bool is_wb = fc->writeback_cache;
> loff_t oldsize;
> struct timespec old_mtime;
>
> @@ -209,10 +210,11 @@ void fuse_change_attributes(struct inode *inode, struct fuse_attr *attr,
> fuse_change_attributes_common(inode, attr, attr_valid);
>
> oldsize = inode->i_size;
> - i_size_write(inode, attr->size);
> + if (!is_wb || !S_ISREG(inode->i_mode))
> + i_size_write(inode, attr->size);
Same as the previous comment. I think you simply need to omit these
checks. But if something *is* needed to special case the write cache
case, then it needs some comments to explain what and why.
> spin_unlock(&fc->lock);
>
> - if (S_ISREG(inode->i_mode)) {
> + if (!is_wb && S_ISREG(inode->i_mode)) {
> bool inval = false;
>
> if (oldsize != attr->size) {
>
More information about the Devel
mailing list