[Devel] Re: [RFC][PATCH -mm 1/5] i/o controller documentation

Vivek Goyal vgoyal at redhat.com
Thu Sep 18 08:33:10 PDT 2008


On Thu, Sep 18, 2008 at 05:03:59PM +0200, Andrea Righi wrote:
> Vivek Goyal wrote:
> > On Wed, Aug 27, 2008 at 06:07:33PM +0200, Andrea Righi wrote:
> >> Documentation of the block device I/O controller: description, usage,
> >> advantages and design.
> >>
> >> Signed-off-by: Andrea Righi <righi.andrea at gmail.com>
> >> ---
> >>  Documentation/controllers/io-throttle.txt |  377 +++++++++++++++++++++++++++++
> >>  1 files changed, 377 insertions(+), 0 deletions(-)
> >>  create mode 100644 Documentation/controllers/io-throttle.txt
> >>
> >> diff --git a/Documentation/controllers/io-throttle.txt b/Documentation/controllers/io-throttle.txt
> >> new file mode 100644
> >> index 0000000..09df0af
> >> --- /dev/null
> >> +++ b/Documentation/controllers/io-throttle.txt
> >> @@ -0,0 +1,377 @@
> >> +
> >> +               Block device I/O bandwidth controller
> >> +
> >> +----------------------------------------------------------------------
> >> +1. DESCRIPTION
> >> +
> >> +This controller allows to limit the I/O bandwidth of specific block devices for
> >> +specific process containers (cgroups) imposing additional delays on I/O
> >> +requests for those processes that exceed the limits defined in the control
> >> +group filesystem.
> >> +
> >> +Bandwidth limiting rules offer better control over QoS with respect to priority
> >> +or weight-based solutions that only give information about applications'
> >> +relative performance requirements. Nevertheless, priority based solutions are
> >> +affected by performance bursts, when only low-priority requests are submitted
> >> +to a general purpose resource dispatcher.
> >> +
> >> +The goal of the I/O bandwidth controller is to improve performance
> >> +predictability from the applications' point of view and provide performance
> >> +isolation of different control groups sharing the same block devices.
> >> +
> >> +NOTE #1: If you're looking for a way to improve the overall throughput of the
> >> +system probably you should use a different solution.
> >> +
> >> +NOTE #2: The current implementation does not guarantee minimum bandwidth
> >> +levels, the QoS is implemented only slowing down I/O "traffic" that exceeds the
> >> +limits specified by the user; minimum I/O rate thresholds are supposed to be
> >> +guaranteed if the user configures a proper I/O bandwidth partitioning of the
> >> +block devices shared among the different cgroups (theoretically if the sum of
> >> +all the single limits defined for a block device doesn't exceed the total I/O
> >> +bandwidth of that device).
> >> +
> > 
> > Hi Andrea,
> > 
> > Had a query. What's your use case for capping max bandwidth? I was
> > wondering will proportional bandwidth not cover it. So if we allocate
> > weight/share to every cgroup and limit the bandwidth based on shares
> > only in case of contention. Otherwise applications get to unlimited
> > bandwidth. Much like what cpu controller does or for that matter dm-ioband
> > seems to be doing the same thing. Will you not get same kind of QoS here when
> > comapred to max-bandwidth. The only thing probably missing is what we call
> > hard limit. When BW is available but you don't want a user to use that
> > BW, until and unless user has paid for that.
> 
> At the beginning my use case was to guarantee a certain level
> performance _predictability_. That means no more and no less than the
> specified threshold (should I say this would be useful for the real-time
> apps? maybe yes).
> 

Is "no more" harmful for real-time env? Which RT application hates more
bandwidth than what one asked for? I could understand "no-less" but you
mentioned in the past that implementing minimum gurantees is lot harder.

I was thinking that what if we continue to stick to the current policy
of letting RT requests go first and try to let them use disk bw first.
cfq first dispatches requests of RT class (based on their priority).
So in simple implementation, IO controller will simply let all the RT class
requests to go directly to elevator and then let elevator dispatch these
requests based on their RT prio. IO-controller will only buffer and control
requests of non-RT class. This will make sure that we don't break the case of
existing working RT applications and still be able to divide remaining disk
BW among other non-RT tasks.

IMHO, once above simple scheme is working, we can probably extend it to
provide additional level of controls.
 
Thanks
Vivek
_______________________________________________
Containers mailing list
Containers at lists.linux-foundation.org
https://lists.linux-foundation.org/mailman/listinfo/containers




More information about the Devel mailing list