[Devel] [RFC][ for -mm] memory controller enhancements for NUMA [8/10] move reclaim_mapped calc routine (cleanup for later patch)
KAMEZAWA Hiroyuki
kamezawa.hiroyu at jp.fujitsu.com
Wed Nov 14 00:53:06 PST 2007
Just for clean up for later patch for avoiding dirty nesting....
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu at jp.fujitsu.com>
mm/vmscan.c | 184 +++++++++++++++++++++++++++++++-----------------------------
1 file changed, 97 insertions(+), 87 deletions(-)
Index: linux-2.6.24-rc2-mm1/mm/vmscan.c
===================================================================
--- linux-2.6.24-rc2-mm1.orig/mm/vmscan.c
+++ linux-2.6.24-rc2-mm1/mm/vmscan.c
@@ -950,6 +950,98 @@ static inline int zone_is_near_oom(struc
}
/*
+ * Determine we should try to reclaim mapped pages.
+ */
+static int calc_reclaim_mapped(struct zone *zone, int priority, int swappiness)
+{
+ long mapped_ratio;
+ long distress;
+ long swap_tendency;
+ long imbalance;
+ int reclaim_mapped;
+
+ if (zone_is_near_oom(zone))
+ return 1;
+ /*
+ * `distress' is a measure of how much trouble we're having
+ * reclaiming pages. 0 -> no problems. 100 -> great trouble.
+ */
+ distress = 100 >> min(zone->prev_priority, priority);
+
+ /*
+ * The point of this algorithm is to decide when to start
+ * reclaiming mapped memory instead of just pagecache. Work out
+ * how much memory
+ * is mapped.
+ */
+ mapped_ratio = ((global_page_state(NR_FILE_MAPPED) +
+ global_page_state(NR_ANON_PAGES)) * 100) /
+ vm_total_pages;
+ /*
+ * Now decide how much we really want to unmap some pages. The
+ * mapped ratio is downgraded - just because there's a lot of
+ * mapped memory doesn't necessarily mean that page reclaim
+ * isn't succeeding.
+ *
+ * The distress ratio is important - we don't want to start
+ * going oom.
+ *
+ * A 100% value of vm_swappiness overrides this algorithm
+ * altogether.
+ */
+ swap_tendency = mapped_ratio / 2 + distress + swappiness;
+
+ /*
+ * If there's huge imbalance between active and inactive
+ * (think active 100 times larger than inactive) we should
+ * become more permissive, or the system will take too much
+ * cpu before it start swapping during memory pressure.
+ * Distress is about avoiding early-oom, this is about
+ * making swappiness graceful despite setting it to low
+ * values.
+ *
+ * Avoid div by zero with nr_inactive+1, and max resulting
+ * value is vm_total_pages.
+ */
+ imbalance = zone_page_state(zone, NR_ACTIVE);
+ imbalance /= zone_page_state(zone, NR_INACTIVE) + 1;
+
+ /*
+ * Reduce the effect of imbalance if swappiness is low,
+ * this means for a swappiness very low, the imbalance
+ * must be much higher than 100 for this logic to make
+ * the difference.
+ *
+ * Max temporary value is vm_total_pages*100.
+ */
+ imbalance *= (vm_swappiness + 1);
+ imbalance /= 100;
+
+ /*
+ * If not much of the ram is mapped, makes the imbalance
+ * less relevant, it's high priority we refill the inactive
+ * list with mapped pages only in presence of high ratio of
+ * mapped pages.
+ *
+ * Max temporary value is vm_total_pages*100.
+ */
+ imbalance *= mapped_ratio;
+ imbalance /= 100;
+
+ /* apply imbalance feedback to swap_tendency */
+ swap_tendency += imbalance;
+
+ /*
+ * Now use this metric to decide whether to start moving mapped
+ * memory onto the inactive list.
+ */
+ if (swap_tendency >= 100)
+ reclaim_mapped = 1;
+
+ return reclaim_mapped;
+}
+
+/*
* This moves pages from the active list to the inactive list.
*
* We move them the other way if the page is referenced by one or more
@@ -966,6 +1058,8 @@ static inline int zone_is_near_oom(struc
* The downside is that we have to touch page->_count against each page.
* But we had to alter page->flags anyway.
*/
+
+
static void shrink_active_list(unsigned long nr_pages, struct zone *zone,
struct scan_control *sc, int priority)
{
@@ -979,93 +1073,9 @@ static void shrink_active_list(unsigned
struct pagevec pvec;
int reclaim_mapped = 0;
- if (sc->may_swap) {
- long mapped_ratio;
- long distress;
- long swap_tendency;
- long imbalance;
-
- if (zone_is_near_oom(zone))
- goto force_reclaim_mapped;
-
- /*
- * `distress' is a measure of how much trouble we're having
- * reclaiming pages. 0 -> no problems. 100 -> great trouble.
- */
- distress = 100 >> min(zone->prev_priority, priority);
-
- /*
- * The point of this algorithm is to decide when to start
- * reclaiming mapped memory instead of just pagecache. Work out
- * how much memory
- * is mapped.
- */
- mapped_ratio = ((global_page_state(NR_FILE_MAPPED) +
- global_page_state(NR_ANON_PAGES)) * 100) /
- vm_total_pages;
-
- /*
- * Now decide how much we really want to unmap some pages. The
- * mapped ratio is downgraded - just because there's a lot of
- * mapped memory doesn't necessarily mean that page reclaim
- * isn't succeeding.
- *
- * The distress ratio is important - we don't want to start
- * going oom.
- *
- * A 100% value of vm_swappiness overrides this algorithm
- * altogether.
- */
- swap_tendency = mapped_ratio / 2 + distress + sc->swappiness;
-
- /*
- * If there's huge imbalance between active and inactive
- * (think active 100 times larger than inactive) we should
- * become more permissive, or the system will take too much
- * cpu before it start swapping during memory pressure.
- * Distress is about avoiding early-oom, this is about
- * making swappiness graceful despite setting it to low
- * values.
- *
- * Avoid div by zero with nr_inactive+1, and max resulting
- * value is vm_total_pages.
- */
- imbalance = zone_page_state(zone, NR_ACTIVE);
- imbalance /= zone_page_state(zone, NR_INACTIVE) + 1;
-
- /*
- * Reduce the effect of imbalance if swappiness is low,
- * this means for a swappiness very low, the imbalance
- * must be much higher than 100 for this logic to make
- * the difference.
- *
- * Max temporary value is vm_total_pages*100.
- */
- imbalance *= (vm_swappiness + 1);
- imbalance /= 100;
-
- /*
- * If not much of the ram is mapped, makes the imbalance
- * less relevant, it's high priority we refill the inactive
- * list with mapped pages only in presence of high ratio of
- * mapped pages.
- *
- * Max temporary value is vm_total_pages*100.
- */
- imbalance *= mapped_ratio;
- imbalance /= 100;
-
- /* apply imbalance feedback to swap_tendency */
- swap_tendency += imbalance;
-
- /*
- * Now use this metric to decide whether to start moving mapped
- * memory onto the inactive list.
- */
- if (swap_tendency >= 100)
-force_reclaim_mapped:
- reclaim_mapped = 1;
- }
+ if (sc->may_swap)
+ reclaim_mapped = calc_reclaim_mapped(zone, priority,
+ sc->swappiness);
lru_add_drain();
spin_lock_irq(&zone->lru_lock);
_______________________________________________
Containers mailing list
Containers at lists.linux-foundation.org
https://lists.linux-foundation.org/mailman/listinfo/containers
More information about the Devel
mailing list