[CRIU] LXC checkpoint/restore HOWTO using upstream tools

Zmudzinski, Krystof C krystof.c.zmudzinski at intel.com
Thu Sep 25 16:37:28 PDT 2014


Tycho,

I missed that patch.  

Krystof

-----Original Message-----
From: Tycho Andersen [mailto:tycho.andersen at canonical.com] 
Sent: Wednesday, September 24, 2014 1:55 PM
To: Zmudzinski, Krystof C
Cc: CRIU
Subject: Re: [CRIU] LXC checkpoint/restore HOWTO using upstream tools

Krystof,

On Wed, Sep 24, 2014 at 05:27:43PM +0000, Zmudzinski, Krystof C wrote:
> Tycho,
> 
> I can confirm that the following steps work (executed as root):
> 1.	apt-get build-dep lxc
> 2.	get lxc source and build
> 	a.	./autogen.sh
> 	b.	./configure
> 	c.	make install
> 3.	add /usr/local/lib/x86_64-linux-gnu to /etc/ld.so.conf.d/x86_64-linux-gnu.conf
> 4.	ldconfig -v
> 5.	Don't create any containers
> 	a.	lxcbr0 missing
> 	b.	cgroups not mounting
> 	c.	apparmor not installed in correct directory
> 6.	apt-get install lxc
> 7.	reboot (or restart network but we need lxcbr0)
> 8.	lxc-create -t ubuntu -n u1 -- -r trusty -a amd64
> 9.	lxc-start, lxc-attach, and lxc-stop should work
> 10.	get criu
> 11.	apt-get install protobuf-c-compiler
> 12.	edit Makefile end remove install-man
> 13.	build criu (make install)
> 14.	lxc-start, lxc-attach
> 15.	umount /sys/fs/fuse/connections/
> 16.	exit
> 17.	lxc-checkpoint -s -D /tmp/checkpoint -n u1
> 	a.	this can fail because a socket has data
> 	b.	just wait and repeat
> 18.	lxc-checkpoint -r -D /tmp/checkpoint -n u1
> 19.	this doesn't work correctly
> 	a.	container is resumed 
> 	b.	but lxc-attach, lxc-stop don't work
> 20.	solution
> 	a.	after lxc-start do lxc-info and note the IP address
> 	c.	don't forget to umount /sys/fs/fuse/connections/
> 	d.	after resuming do ssh ubuntu at iIP_address
> 		
> 
> But we are back to the original problems I reported a while ago:
> 1. After resume the container is gone and the only thing left is 
> lxc-checkpoint process

There was a bug with how lxc-checkpoint detected criu exiting (in particular, it would hang if criu was killed by a signal) in some cases, I just sent a patch to the ML about that this morning.

> 2. lxc-info reports that the container is running but show a couple of 
> errors 3. After killing lxc-checkpoint process lxc-info shows 
> correctly that the container is stopped
> 
> So I removed DECLARE_ARG("--restore-detached"); from lxccontainer.c, 
> 1. The container is running but lxc-attach, lxc-info lxc-stop just hang.
> 2. Sometimes the process tree looks has these defunct processes:

Yes, lxc wants to be the parent of the restored process, so we need to --restore-detached.

> 30889 pts/0    S      0:00 lxc-checkpoint -r -D /tmp/checkpoint/ -n u1
> 30890 pts/0    S      0:00  \_ /usr/local/sbin/criu restore --tcp-establishe
> 30892 ?        Ss     0:00      \_ /sbin/init
> 30934 ?        S      0:00          \_ upstart-file-bridge --daemon
> 30935 ?        S      0:00          \_ upstart-socket-bridge --daemon
> 30936 ?        Ss     0:00          \_ /sbin/getty -8 38400 tty1
> 30937 ?        Ss     0:00          \_ /sbin/getty -8 38400 console
> 30938 ?        Ss     0:00          \_ /sbin/getty -8 38400 tty3
> 30939 ?        Ss     0:00          \_ /sbin/getty -8 38400 tty2
> 30940 ?        Ss     0:00          \_ /sbin/getty -8 38400 tty4
> 30941 ?        Ss     0:00          \_ cron
> 30942 ?        S      0:00          \_ upstart-udev-bridge --daemon
> 30943 ?        Ss     0:00          \_ /usr/sbin/sshd -D
> 30944 ?        Zs     0:00          \_ [criu] <defunct>
> 30945 ?        Zs     0:00          \_ [criu] <defunct>
> 30946 ?        Ss     0:00          \_ /lib/systemd/systemd-udevd --daemon
> 
> and  restore.log shows this:
> RTNETLINK answers: File exists
> RTNETLINK answers: File exists 
> RTNETLINK answers: File exists   
>  233: Error (files-reg.c:820): File var/log/auth.log has bad size 
> 27848 (\ expect 27588)

This to me looks like the real cause of all the problems that you're having. Something is writing to var/log/auth.log after the dump takes place, and criu doesn't like that.

Tycho

>    291: Error (sk-unix.c:695): Can't connect 0xe86b socket: Connection 
> refu\ sed
> 
> But sometimes the tree looks OK:
> 31711 pts/1    S      0:00 lxc-checkpoint -r -D /tmp/checkpoint/ -l DEBUG -n u1
> 31712 pts/1    S      0:00  \_ /usr/local/sbin/criu restore --tcp-established --evasive-devices --file-locks --link-remap --manage-cgroups --action-script /usr/local/libexec/lxc/lxc-restore
> 31714 ?        Ss     0:00      \_ /sbin/init
> 31756 ?        S      0:00          \_ upstart-file-bridge --daemon
> 31759 ?        S      0:00          \_ upstart-socket-bridge --daemon
> 31763 ?        Ss     0:00          \_ /usr/sbin/sshd -D
> 31764 ?        Ss     0:00          \_ cron
> 31765 ?        Ss     0:00          \_ dhclient -1 -v -pf /run/dhclient.eth0.pid -lf /var/lib/dhcp/dhclient.eth0.leases eth0
> 31766 ?        S      0:00          \_ upstart-udev-bridge --daemon
> 31767 ?        Ssl    0:00          \_ rsyslogd
> 31768 ?        Ss     0:00          \_ /lib/systemd/systemd-udevd --daemon
> 31783 tty7     Ss+    0:00          \_ /sbin/getty -8 38400 console
> 32135 ?        Ss     0:00          \_ /sbin/getty -8 38400 tty1
> 32139 ?        Ss     0:00          \_ /sbin/getty -8 38400 tty3
> 32142 ?        Ss     0:00          \_ /sbin/getty -8 38400 tty2
> 32143 ?        Ss     0:00          \_ /sbin/getty -8 38400 tty4
> 
> and restore.log just has these:
> RTNETLINK answers: File exists
> RTNETLINK answers: File exists 
> RTNETLINK answers: File exists   
> 
> I can still do ssh.
> 
> Krystof
> 
> -----Original Message-----
> From: Tycho Andersen [mailto:tycho.andersen at canonical.com]
> Sent: Wednesday, September 24, 2014 9:25 AM
> To: Zmudzinski, Krystof C
> Cc: CRIU
> Subject: Re: [CRIU] LXC checkpoint/restore HOWTO using upstream tools
> 
> Hi Krystof,
> 
> On Wed, Sep 24, 2014 at 04:14:00PM +0000, Zmudzinski, Krystof C wrote:
> > Tycho,
> > 
> > I have finally succeeded to configure my system so I'm able to suspend and resume my container using LXC built from source.
> 
> Cool!
> 
> > I started with a fresh Ubuntu 14.04 LTS.
> > 
> > The trick that did it for me was to first follow the instructions 
> > from 
> > http://bazaar.launchpad.net/~tycho-s/+junk/snapshot-instructions/vie
> > w/
> > head:/README
> > 
> > This, by itself, didn't quite work as I was unable to start my container.  The error messages had to do first with missing cgroups; after I fixed that with missing apparmor profiles.
> > 
> > So I just installed the default lxc package (i.e., sudo apt-get 
> > install lxc)
> 
> I guess the packaging probably also sets up a bridge, if you didn't have one already. Perhaps I can add that to the development instructions there.
> 
> > And everything works now.  
> > 
> > I think that the development package still wants to use 
> > /etc/apparmor.d/lxc/ Instead of /usr/local/etc/apparmor.d/lxc/ 
> > because that was the last thing that installing the default lxc fixed.
> > 
> > What I still don't understand is that I can't find lxc-container-default-with-mounting anywhere on my machine.
> 
> Is it just a typo in the name? The correct profile name is "lxc-default-with-mounting" (i.e. no -container-).
> 
> Tycho
> 
> > I could be completely wrong here so I will try repeating these steps again to confirm.
> > 
> > Krystof
> > 
> > 
> > -----Original Message-----
> > From: Tycho Andersen [mailto:tycho.andersen at canonical.com]
> > Sent: Tuesday, September 23, 2014 1:36 PM
> > To: Zmudzinski, Krystof C
> > Cc: CRIU
> > Subject: Re: [CRIU] LXC checkpoint/restore HOWTO using upstream 
> > tools
> > 
> > Hi Krystof,
> > 
> > On Tue, Sep 23, 2014 at 08:29:30PM +0000, Zmudzinski, Krystof C wrote:
> > > In fact, the last time everything seems to be working is just before ldconfig -v.  I can start, attach and stop.  But as soon as I execute ldconfig, lxc-start says that lxc-start: Executing '/sbin/init' with no configuration file may crash the host and lxc-info says that the container doesn't exist.  Reverting ldconfig doesn't change anything.
> > 
> > Yes, that's (presumably) because it is looking at a new lxcpath (/usr/local/var/lib/lxc vs. /var/lib/lxc) when you're using the right liblxc.so. You have a few options here:
> > 
> > 1. just re-create your container under /usr/local (or just copy it) 2. change your lxcpath to point to the old container 3. re-compile with --prefix /usr so that it installs over the packaged
> >    lxc (I don't recommend this :)
> > 
> > You can verify which lxcpath things are pointed to via:
> > 
> > sudo lxc-config lxc.lxcpath
> > 
> > Tycho
> > 
> > > 
> > > Krystof
> > > 
> > > -----Original Message-----
> > > From: Tycho Andersen [mailto:tycho.andersen at canonical.com]
> > > Sent: Monday, September 22, 2014 4:32 PM
> > > To: Zmudzinski, Krystof C
> > > Cc: CRIU
> > > Subject: Re: [CRIU] LXC checkpoint/restore HOWTO using upstream 
> > > tools
> > > 
> > > Hi Krystof,
> > > 
> > > On Mon, Sep 22, 2014 at 09:44:24PM +0000, Zmudzinski, Krystof C wrote:
> > > > Tycho,
> > > > 
> > > > After following the instructions on http://criu.org/LXC, I wanted to install the latest source for LXC and make some changes.  How can I build and install the new lxc-* so I overwrite what sudo apt-get install lxc did?  Right now, following the instructions on http://bazaar.launchpad.net/~tycho-s/+junk/snapshot-instructions/view/head:/README everything gets installed in different directories and things stop working completely.  
> > > 
> > > What's the output of ldd `which lxc-checkpoint`? Did you do the bit in there about modifying the ld.so.conf?
> > > 
> > > Tycho
> > > 
> > > > I always get this error when I try to start a container:
> > > >  >       lxc-start 1410804731.572 ERROR    lxc_cgfs - Could not find writable mount point for cgroup hierarchy 3 while trying to create cgroup.
> > > > >       lxc-start 1410804731.572 ERROR    lxc_start - failed creating cgroups
> > > > >       lxc-start 1410804731.599 ERROR    lxc_start - failed to spawn 'u1'
> > > > >       lxc-start 1410804736.604 ERROR    lxc_start_ui - The container failed to start.
> > > > 
> > > > Krystof
> > > > 
> > > > -----Original Message-----
> > > > From: Tycho Andersen [mailto:tycho.andersen at canonical.com]
> > > > Sent: Friday, September 19, 2014 10:53 AM
> > > > To: Zmudzinski, Krystof C
> > > > Cc: CRIU
> > > > Subject: Re: [CRIU] LXC checkpoint/restore HOWTO using upstream 
> > > > tools
> > > > 
> > > > Hi Krystof,
> > > > 
> > > > On Fri, Sep 19, 2014 at 05:18:32PM +0000, Zmudzinski, Krystof C wrote:
> > > > > lxc-checkpoint fails.  I did a fresh install of ubuntu 14.04 and followed your instructions.  I also installed criu-1.3.1.  
> > > > > 
> > > > > From dump.log:
> > > > > (00.377632) Error (mount.c:805): fusectl isn't empty: 8388625
> > > > 
> > > > Ah, that is a good point. Right now CRIU doesn't support dumping any fuse filesystems (i.e., /sys/fs/fuse/connections needs to be empty). I guess stock desktop ubuntu might have some of these enabled. You can either uninstall any fuse modules or try ubuntu-server (or better yet, the cloud images) as a host.
> > > > 
> > > > I guess maybe we should have lxc-checkpoint look for some of this stuff too, vs. just config.
> > > > 
> > > > > The container does contain ttys and console:
> > > > > 5784 ?        Ss     0:00              \_ lxc-start -n cn_01
> > > > >  5804 ?        Ss     0:01                  \_ /sbin/init
> > > > >  5998 ?        S      0:00                      \_ upstart-udev-bridge --daemon
> > > > >  6009 ?        Ss     0:00                      \_ /lib/systemd/systemd-udevd --daemon
> > > > >  6077 ?        S      0:00                      \_ upstart-socket-bridge --daemon
> > > > >  6079 ?        Ssl    0:00                      \_ rsyslogd
> > > > >  6085 ?        S      0:00                      \_ upstart-file-bridge --daemon
> > > > >  6117 ?        Ss     0:00                      \_ dhclient -1 -v -pf /run/dhclient.eth0.pid -lf /var/lib/dhcp/dhclient.eth0.leases eth0
> > > > >  6202 ?        Ss     0:00                      \_ cron
> > > > >  6207 ?        Ss     0:00                      \_ /usr/sbin/sshd -D
> > > > >  7083 ?        Ss     0:00                      \_ /sbin/getty -8 38400 tty2
> > > > >  7084 ?        Ss     0:00                      \_ /sbin/getty -8 38400 tty4
> > > > >  7085 ?        Ss     0:00                      \_ /sbin/getty -8 38400 tty3
> > > > >  7086 ?        Ss     0:00                      \_ /sbin/getty -8 38400 console
> > > > >  7087 ?        Ss     0:00                      \_ /sbin/getty -8 38400 tty1
> > > > > 
> > > > > I don't think it's enough to just add this to the config file:
> > > > > # hax for criu
> > > > > lxc.console = none
> > > > > lxc.tty = 0
> > > > > lxc.cgroup.devices.deny = c 5:1 rwm
> > > > > 
> > > > > because there is this at the very beginning:
> > > > > # Common configuration
> > > > > lxc.include = /usr/share/lxc/config/ubuntu.common.conf
> > > > 
> > > > Why is that a problem? The later values in the config override any earlier ones. lxc-checkpoint will also complain and refuse to dump a container that doesn't have the right configuration bits set, so if it tried to dump, that means it thinks the config is valid.
> > > > 
> > > > Tycho



More information about the CRIU mailing list